Error Signs - Sanyo FXD-780RDS Operating Instructions Manual

ERROR SIGNS

If a problem should occur while operating the CD player, one of the following error signs may be displayed.
Refer to the table below to identify the problem, then take the suggested corrective action. If the error
persists, contact your nearest dealer.
Message
CD ERROR
MECK ERR.
ERROR SIGNS (CD changer)
If a problem should occur while operating the CD changer, one of the following error signs may be dis-
played. Refer to the table below to identify the problem, then take the suggested corrective action. If the
error persists or "MECA ERR" and "09 ERROR" appears, contact your nearest dealer.
Message
NO MAGA
NO DISC
CD ERROR
COMM ERR
TEMP ERR
Cause
Dirty disc.
Scratched disc.
Up-side-down.
Focus error.
Data and focus error.
Mechanical problem.
Cause
No magazine.
No disc.
Up-side-down.
Communication error
Excessive temperature
conditions at the CD
changer.
GB–18
Remedy
Clean the disc.
Replace the disc.
Check the disc.
Try ejecting and re-inserting
under normal temperature
conditions.
Under normal temperature
conditions, eject and insert
clean, undamaged disc
properly.
Eject and re-insert.
Remedy
Load the magazine in
the CD changer.
Check the disc.
Check the disc.
Check the connection of
the CD changer.
The error sign will go off
and play will resume
when the temperature at
the CD changer returns
to a normal range.