Error Signs - Sanyo FXCD-1350 Operating Instructions Manual

ERROR SIGNS

CD Player
If a problem should occur while operating the built-in CD player, one of the following error signs
may be displayed:
Symptom
E01
E07
E99
CD Changer
If a problem should occur while operating the connected CD changer, one of the following error signs may
be displayed.
Symptom
E01
E07
no Cd
Cause
Abnormal CD mechanism function.
The disc was inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the opti-
cal lens.
Internal connection check error.
Cause
Abnormal mechanism function
The disc was inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the
optical lens.
The magazine is not fully inserted
into the changer.
No discs in the magazine.
-19-
Solution
Press the eject button.
Turn the power off and then on
again. If it is not corrected, contact
the place of purchase.
Insert the disc properly.
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
Turn the power off and then on
again.
If it is not corrected, contact the
place of purchase.
Solution
Contact the place of purchase.
Insert the disc properly.
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
Refer to the instructions supplied
with the CD changer.
Completely insert the magazine into
the changer until it clicks into place.
Load discs into the magazine.