Quick Reference Guide
Operating the VC6000 Series
System Indication LED
The System Indication LED is located inside the Power Button (See
Front Features on page
The System Indication LED indicates the following states:
LED State
Off
Fast flashing amber
Slowly flashing amber
Controlling Screen Brightness
There are five levels of screen brightness.
To adjust the brightness of the screen, press the Brightness down button
to decrease the brightness or the Brightness up button to increase the
brightness.
Controlling Keypad Illumination
There are five levels of Keypad Illumination. To adjust the Keypad
Illumination:
1.
Press the Ctrl key.
2.
Press the Brightness up/down key to increase/decrease the keypad
illumination.
3.
Press the Ctrl key.
4).
Normal operation
• Critical power event. Input power is out of
operating range. The VC6000 Series may turn
off - save your entries.
• Vehicle engine start - no action is required.
• Cold reset is active - no action is required.
Critical temperature event. Ambient temperature
is out of operating range -20 °C to 60 °C (-4 °F to
140 °F). The VC6000 Series may turn off.
Indication
17