Motorola VC6000 Series Quick Reference Manual page 10

8
Installing an SD Memory Card
A Secure Digital (SD) memory card provides secondary non-volatile data
storage. MMC and non-SDHC SD memory cards can be used. The card
slot is located on the side panel of the VC6000 Series.
To install the SD memory card:
1. Lift up the Protective Rubber Cap that covers the Memory Card Slot.
2. Position the SD Memory Card with the contacts facing the back of
the VC6000 Series and insert into the Memory Card Slot. The corner
notch of the SD Memory Card fits into the Memory Card Slot only
one way.
3. Use your pen to push the SD Memory Card inwards to lock.
4. Replace the Protective Rubber Cap to seal the Memory Card Slot.
Mounting the VC6000 Series
Guidelines for Routing Cables
• Establish a neat route for the cable, staying clear of moving parts or hot
surfaces.
• Fix the cable to an existing cable runs inside the vehicle using cable
ties.
• When the cabling must go through a panel, use a suitable cable guard.
VC6000 Series Vehicle Computers
Protective Rubber Cap
Memory
Card Slot
SD Memory Card