Counting - Sartorius Secura User Manual

Max 2100 g
0.00
Reference
5

Counting

Reference Accuracy
5
Normal
10
20
10fold
Counting
Purpose: Use this application to determine the number of parts of approximately equal
weight. The weight of a counted reference sample is calculated and then the
objects with an unknown piece count are weighed. The balance displays the
number of parts and the piece weight.
Minimize counting errors:
– Ensure that the weight of individual parts is evenly distributed.
– Larger reference piece counts lead to a higher degree of accuracy.
– Switch on Auto Reference Updating.
t
Select the Menu key in any application.
t
Select the
y The
Counting
The piece count of the reference sample is displayed under
d = 0.01 g
pcs
t
To set the reference sample quantity, select the gray button.
Reference
5
pcs
y The
Counting
t
Enter the reference piece count on the left.
Select a value or select
t
Select the accuracy of the weight value during counting in the center.
y Activate "Automatic Reference Sample Updating" on the right.
This "updating" optimizes the counting accuracy. The average piece weight is
recalculated every time the reference sample is updated automatically. Since
the new parts enlarge the basis for the calculation, this increases the counting
accuracy of the reference and with it the result too.
t
l
Select
t
A
Select
t
Place a container on the weighing pan.
symbol in the menu.
Counting
application appears.
settings window appears.
t
, enter the desired value, and confirm with
to confirm.
to zero the balance if necessary.
User Manual for Secura, Quintix, Practum
Counting
.
Reference
l
.
67