Sartorius Secura User Manual page 30

System Settings (Setup Menu)
30 User Manual for Secura, Quintix, Practum
menu option:
Ambient conditions
t
Choose whether the conditions at the balance location are
If is selected, adverse ambient conditions (drafts, vibrations) are
Unstable
filtered by changing the measurement time for the weight values.
menu option:
Application
t
Choose whether the balance will be used for
This setting is used to compensate for load fluctuations on the display.
– : The display responds very quickly to fast load changes.
Weighing
The display responds more slowly to small changes in weight (in the digit
range). This setting is suitable for normal weighing.
– : The display responds quickly to small changes in weight, making
Dosing
it faster and more accurate for additional dosing and container filling
functions.
menu option:
Stability signal
t
Choose whether stability is shown with
or Fast on the display.
The balance stability is displayed as soon as the weighing result is constant
within a defined range. Until stability is reached, the measured values is shown
in gray on the display and only turns black once the balance is deemed stable.
menu option:
Zero / Tare
t
Define settings for zeroing and taring.
– Zero/Tare function
or
With stability Without stability
balance will automatically be tared when
If is selected, the balance is tared the next time stability is
With stability
A
reached after or
–
Automatic zero (zero tracking function)
changes of a set fraction of scale intervals per second from the display zero
point are zeroed automatically.
–
Zero/Tare at power on
automatically zeroed or tared when switched on.
Weighing
High accuracy
: Choose whether the balance is zeroed and tared
. If
Without stability
A
or
D
is selected.
: When this option is active,
: When this option is active, the balance is
or .
Stable Unstable
or .
Dosing
, ,
Medium accuracy
is selected, the
D
is selected.