Troubleshooting; Indicators - Casio XJ-UT310WN User Manual

Indicators

Indicators keep you informed about the current operational status of the projector. The following
shows what the indicators look like when operation is normal.
When the indicators appear
like this:
POWER/
LIGHT
STANDBY
Red Amber
Red
Green Amber
Green
Green Green
Red
: Lit : Flashing
When a warning message appears on the projection screen, or when the POWER/STANDBY, LIGHT,
and TEMP indicators are lit or flashing in a pattern other than those shown above, it means that a
projector error has occurred. For details, see "Error Indicators and Warning Messages" (below).

Troubleshooting

It means this:
You have just plugged the AC power cord into a power outlet. Wait
TEMP
until the projector enters the standby state (see below) before trying
to turn on power.
Amber
Standby state: The AC power cord is plugged in and the projector is
in standby.
Projector is warming up after being turned on.
Amber
Projector is on and standing by for use.
"Off" is selected for the projector's Eco Mode (page 51) setting.
Projector is on and standing by for use.
"On (Auto)" or "On (Manual)" is selected for the projector's Eco Mode
(page 51) setting.
Projector is performing internal power down processes.
: Unlit
67