Autorun; File Viewer Troubleshooting - Casio XJ-UT331X User Manual

Autorun

Autorun automatically starts playback of image files or movie files on a USB flash drive when the USB
flash drive is connected to projector's USB-A port, or if the projector is turned on while a USB flash
drive is connected to the USB-A port. The setup menu settings shown below need to be configured
before using Autorun.
 "Multimedia Settings 3 Autorun" (page 37): Enable
 "Option Settings 2 3 Plug and Play" (page 35): On
To do this:
Prepare an Autorun USB
flash drive
Auto project files on a USB
Flash drive

File Viewer Troubleshooting

Problem
File Viewer does not appear when I
connect USB flash drive to the
projector's USB-A port.
Some folders and/or files are not
displayed in the file menu.
When I connect my digital camera
to the projector via USB, digital
camera memory contents do not
appear.
On the Slide Mode file menu,
question marks (?) appear in place
of thumbnails.
Perform this operation:
1. Create a folder named "AUTORUNC" (all single-byte upper-case characters) in the
root directory of the USB flash drive.
2. Insert all of the image files or movie file you want to auto project into the folder you
created in step 1.
 If you want to auto project a movie file, place only one movie file into the
"AUTORUNC" folder. Do not place any other files into the folder. If there is both
a movie file and image file in the "AUTORUNC" folder, the image file will be
given priority and the movie file will not be played.
 Multiple image files can be placed in the "AUTORUNC" folder without any
problem. If there are, the operation under "Auto project files on a USB Flash
drive" below will start a slideshow of the images.
If the projector is turned on, plug the USB flash drive you prepared above into the
projector's USB-A port. If the projector is turned off, plug the USB flash drive you
prepared above into the projector's USB-A port, and then turn on the projector.
 The USB flash drive you are connecting may have a format that cannot be
recognized by the projector.
 If "Off" is selected for the "Option Settings 2 3 Plug and Play" setting
(page 35), File Viewer will not startup automatically even if a USB flash
drive is connected to the projector's USB-A port. If this happens, change
the "Plug and Play" setting to "On".
All the folders and/or files contained in a folder will not be displayed if there
are more than 999 folder and/or files inside the folder. If this happens, reduce
the number of folders and/or files in the folder.
 The digital camera's USB mass storage class setting may not be
configured correctly, or you may need to perform some operation on the
camera. Consult the user documentation for your digital camera for
information about the required settings and operations.
 The digital camera may not support USB mass storage class. If it does not,
you will not be able to use Viewer to view digital camera memory contents.
Question marks are displayed in place of thumbnails of images that cannot
be projected by File Viewer.
Cause and Required Action
43