Returning To The Normal Input Mode From The 3D Input Mode; Horizontal Flipping In The 3D Input Mode; To Swap The Left And Right Images - Casio XJ-UT310WN User Manual

Returning to the Normal Input Mode from the 3D Input Mode

1.
Press the [INPUT] key to display the input source selection screen.
2.
Use the [ ] and [ ] keys to move the highlighting to "To normal input mode"
and then press the [ENTER] key.
This enters the normal input mode and closes the input source selection screen.

Horizontal Flipping in the 3D Input Mode

In side-by-side 3D, a full frame consists of two halves on the left and right for each eye. In rare cases,
the left and right images may be reversed, which causes a loss of 3D depth. If this happens, try using
the following procedure to swap the left and right images with each other.

To swap the left and right images

In the 3D input mode, press the [ENTER] key.
16