Starting Projection Of Files Located In Projector Internal Memory - Casio XJ-UT310WN User Manual

Starting Projection of Files Located in Projector Internal
Memory
1.
If a USB flash drive or some other USB device is connected to the projector's
USB-A port, disconnect it.
2.
Press the [INPUT] key. This will display the "Input" dialog box.
3.
Use the [ ] and [ ] keys to select "Viewer" and then press the [ENTER] key.
4.
On the dialog box that appears, confirm that "File Viewer" is selected and then
press the [ENTER] key.
This will start up File Viewer and display the File Viewer main screen like the one shown below.
5.
Depending on the type of file you want to project, perform one of the operations
below.
To project this type of file: Perform this operation:
Presentation Files
PDF Files
Image Files
Movie Files
"To project a presentation file" (page 25)
"To project a PDF file" (page 26)
"To project an image file" (page 27)
"To project a movie file" (page 27)
20