Casio XJ-UT310WN User Manual page 58

Use this menu item:
Input Settings 3
COMPUTER1 Terminal/
COMPUTER2 Terminal (RC)
Input Settings 3
Video Signal (V)
Input Settings 3
S-Video Signal (V)
Input Settings 3
Signal Name Indicator
Input Settings 3
Restore Menu Defaults
Option Settings 1 3
Auto Adjust (R)
Option Settings 1 3
Eco Mode
Option Settings 1 3
Auto Power Off
Option Settings 1 3
Password
Option Settings 1 3
Direct Power On
Option Settings 1 3
Language
Option Settings 1 3
Restore Menu Defaults
Option Settings 2 3
Plug and Play
To do this:
Specify the method to be used to identify the COMPUTER IN 1/COMPUTER IN 2
terminal input signal.
Auto*: Projector automatically identifies the COMPUTER IN 1/COMPUTER IN 2
terminal input signal.
RGB: Always assumes the COMPUTER IN 1/COMPUTER IN 2 terminal input signal
is an RGB signal.
Component: Always assumes the COMPUTER IN 1/COMPUTER IN 2 terminal input
signal is a component video signal.
Specify the method to be used to identify the video signal being input to the
projector (VIDEO terminal or S-VIDEO terminal input signal).
Auto*: Projector automatically identifies the video input signal.
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM:
Always assumes the video input signal is the specified video signal type.
Specify whether the newly selected input signal type should be displayed (On*) or
not displayed (Off) when the [INPUT] key is pressed to change the input signal.
Return all of the items in the "Input Settings" main menu to their initial defaults for the
currently projecting image source.
Specify whether the projector should detect the RGB input signal type (resolution,
frequency) and adjust the projection image accordingly.
On*: Auto Adjust enabled.
Off: Auto Adjust disabled.
See "Eco Mode (ECO)" (page 51).
Specify the amount of time of projector operation and input signal inactivity to be
allowed before Auto Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min: Time until Auto Power off is triggered.
Off: Disables Auto Power Off.
See "Password Protection" (page 62).
Enable (On) and disable (Off*) projector auto power on as soon as the projector's AC
adapter is plugged into a power outlet.
Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Chinese (Simplified), Chinese (Traditional),
Korean, Japanese, Thai, Indonesian, Malay, Vietnamese, Lithuanian
Important!
Some menus and messages may be displayed in English, regardless of the
language selected here.
Return all of the items in the "Option Settings 1" main menu to their initial defaults for
the currently projecting image source.
Specify whether the projector input source should switch automatically (Plug and
Play: On*) when a supported external USB device is connected to the projector's
USB-A port.
Note
Regardless of the setting of this item, plug-and-play is disabled while the
projector is in the 3D input mode. See "3D Input Mode" on page 15 for
information.
58