Operating The Projector; Output Image And Audio Operations; To Use Manual Keystone Correction (Keystone); To Zoom An Image (D-Zoom) - Casio XJ-UT310WN User Manual

This section explains how to use the remote controller to perform projector operations.

Output Image and Audio Operations

To use manual keystone correction (KEYSTONE)

The projector has a keystone correction feature that prevents
distortion of the projected image when projecting from an
angle.
Use the [KEYSTONE +] and [KEYSTONE –] keys to adjust
keystone correction manually.

To zoom an image (D-ZOOM)

1.
Press the [D-ZOOM] key.
This will enlarge the center of the projected image one step.
2.
To zoom in on the center of the projected image more, press the [D-ZOOM] key
again.
Each press of [D-ZOOM] zooms in (increases the zoom factor). Holding down [D-ZOOM]
continuously scrolls the zoom factor.
3.
While an image is zoomed, use the [ ], [ ], [ ], and [ ] keys to scroll the view
to other parts of the image.
4.
To exit the zoom operation, press the [ESC] key.

To adjust the volume level (VOLUME)

1.
Press the [VOLUME +] or [VOLUME –] key.
This causes the "Volume" screen to appear on the projected image.
2.
Press the [VOLUME +] key to increase the volume, or the [VOLUME –] key to
lower the volume.
3.
After the setting is the way you want, press the [ESC] key.

Operating the Projector

47