Casio XJ-UT310WN User Manual page 83

Command List
Only the following functions are supported while the projector is turned off. Do not try to send any
other command to the projector.
Power on/off: Read
Power on: Write
Get light time: Read
Input of a valid signal must be in progress in order to use a command to turn on blank screen or
change the aspect ratio.
Power On/Off:
Input Switching:
0: Switches the input source to the COMPUTER 1 terminal
and changes the COMPUTER 1 terminal setting to RGB.
1: Switches the input source to COMPUTER 1 terminal and
changes the COMPUTER 1 terminal setting to
component.
2: Switches the input source to Video.
3: Switches the input source to the COMPUTER 2 terminal
and changes the COMPUTER 2 terminal setting to RGB.
4: Switches the input source to COMPUTER 2 terminal and
changes the COMPUTER 2 terminal setting to
component.
6: Switches the input source to COMPUTER 1 terminal and
changes the COMPUTER 1 terminal setting to Auto.
7: Switches the input source to HDMI.
8: Switches the input source to Network.
9: Switches the input source to S-video.
10: Switches the input source to COMPUTER 2 terminal and
changes the COMPUTER 2 terminal setting to Auto.
11: Switches the input source to File Viewer.
12: Switches the input source to USB Display.
13: Switches the input source to CASIO USB Tool.
Blank Screen: Switches the blank screen on or off.
Volume: Specifies a value to adjust the volume level. This
setting is applied to the input source signal that is
currently being projected by the projector.
Color Mode: Selects the color mode.
Aspect Ratio: Specifies the aspect ratio.
Get Light Time: Gets the light time from the projector.
Eco Mode: Enter Eco Mode.
Function
R: Read enabled W: Write enabled
Command
RW
Name
PWR RW
SRC RW
BLK RW
VOL RW
PST RW
ARZ RW
LMP R
PMD RW
83
Setting Range
0: Off, 1: On
0: RGB1, 1: Component 1,
2: Video, 3: RGB2,
4: Component 2,
6: Auto1 (RGB/Component),
7: HDMI, 8: Network,
9: S-Video,
10: Auto2 (RGB/Component),
11: File Viewer,
12: USB Display,
13: CASIO USB Tool
0: Off, 1: On
0 to 30
1: Graphics, 2: Theater,
3: Standard, 4: Blackboard,
5: Natural
0: Normal, 1: 16:9,
2: 4:3, 3: Letter Box,
4: Full, 5: True, 6: 4:3 (Forced)
0- Unit: Hours
0: Off (Bright), 1: Off (Normal),
2: On (Auto), 3: On (Manual 1),
4: On (Manual 2),
5: On (Manual 3),
6: On (Manual 4),
7: On (Manual 5)