Operating The Projector; Selecting The Input Source (Input) - Casio XJ-V100W User Manual

Unless specifically noted otherwise, the operations in this section are performed using the remote
controller. If both the projector and the remote controller have the same key, either one can be used to
perform the corresponding operation.

Selecting the Input Source (INPUT)

The tables below show the input sources that can be selected for each projector model.
XJ-V Series
Input Source Name
Computer
(RGB or Component)
HDMI
XJ-F Series
Input Source Name
Computer
(RGB or Component)
S-Video
Video
HDMI1
HDMI2
File Viewer*
CASIO USB Tool*
Network*
USB Display*
* Network models only

Operating the Projector

Images and audio from a computer or video device connected to the projector's
COMPUTER terminal and AUDIO IN terminal.
Images and audio from a computer or video device connected to the projector's
HDMI terminal.
Images and audio from a computer or video device connected to the projector's
COMPUTER terminal and AUDIO IN terminal.
Images and audio from a video device connected to the projector's S-VIDEO terminal
and AUDIO IN R/L terminals.
Images and audio from a video device connected to the projector's VIDEO terminal
and AUDIO IN R/L terminals.
Images and audio from a computer or video device connected to the projector's
HDMI 1 terminal.
Images and audio from a computer or video device connected to the projector's
HDMI 2 terminal.
Images (and audio in the case of a movie file) contained in the following types of files
located in projector internal memory or on a memory device connected to the
projector's USB-A port: image files, movie files, presentation files, PDF files.
Screen contents of a CASIO calculator or electronic dictionary connected to the
projector's USB-A port.
Screen contents and audio of a computer connected to the projector via wireless LAN
or wired LAN.
Screen contents and audio of a computer connected to the projector's USB-B port.
Output Projection Image (and Audio)
Output Projection Image (and Audio)
14