Andrew 3.7-Meter Earth Station Antenna Installation And Operation Manual page 36

Step 8
Bolt the elevation pivot assembly brackets (P/N 208370 - left and P/N 208371 - right) to
the inside of the ground mount assembly as shown in Figure 3-27.
Step 9
Bolt the jack to the elevation pivot assembly using 5/8 inch hardware (hex bolts, flat-
washers and nuts) as shown in Figures 3-28a and 3-28b.
Figure 3-27: Elevation Pivot Bracket Assembly
Figure 3-28a: Elevation Jack
36
Installation Procedures