Procedure For Removing Shelf Runners & Element Cover - Garland Mealstream Service Manual

PROCEDURE
FOR
Tools required for removing shelf runners and element cover plate.
M6 x 12mm
stainless steel Hex
Head screw
Pt No. 80T7133
Shelf runner
1. Loosen the rear fixings screws of both shelf runners with M6 nut runner.
2. Remove the front fixings screws of both shelf runners with M6 nut runner.
3. Pull the shelf runners forwards away from the rear screws.
4. Remove the 4 off M5 dome nut securing the Element cover plate.
5. Lift the Element cover plate out taking care to not damage the temperature sensor pocket.
REMOVING SHELF RUNNERS
Please Note
DO NOT attempt to carry out the following procedure
unless you have the following tools.
M6 nut runner
M5 nut runner
Mealstream Ovens Pt. No. 32Z3403 Issue 15
ELEMENT COVER PLATE
AND
Page 37
M5 stainless steel
dome nut
Pt. No. 80X7025
Element cover plate