Procedure For Removing Shelf Runners & Element Cover - Garland Mealstream CTM3 Service Manual

PROCEDURE
FOR REMOVING SHELF RUNNERS AND ELEMENT COVER PLATE
DO NOT attempt to carry out the following procedure
Tools required for removing shelf runners and element cover plate.
M6 x 12mm
stainless steel Hex
Head screw
Pt No. 80T7133
Shelf runner
1. Loosen the rear fixings screws of both shelf runners with M6 nut runner.
2. Remove the front fixings screws of both shelf runners with M6 nut runner.
3. Pull the shelf runners forwards away from the rear screws.
4. Remove the 4 off M5 dome nut securing the Element cover plate.
5. Lift the Element cover plate out taking care to not damage the temperature sensor pocket.
Please Note:
unless you have the following tools.
M6 nut runner
M5 nut runner
Mealstream Ovens Pt. No. 32Z3403 Issue 16
Page 37
M5 stainless steel
dome nut
Pt. No. 80X7025
Element cover plate