Garland Mealstream Service Manual page 33

PROCEDURE
9. Position door choke to Door Frame Assembly
making sure it is in the correct orientation (the
top of door choke is marked with 'T' on the
underside).
10. Loosely fit 3 off M5 flat washers, 3 off M5
shockproof washers, and 3 off M5 stainless
steel full nuts.
11. Tape choke Spacer S325 to the cavity base and
tape choke Spacers S215 to sides and top of
door choke.
Close the door and centralise the door choke.
Fit the remaining 20 M5 washers and nuts
tighten the fixings evenly.
1 Cavity base
2 Choke fingers Top
3 Choke fingers Left
4 Choke fingers Right
Remove spacing pieces and check door
operation.
BUILDING
FOR
S325
S215
S215
S215
Mealstream Ovens Pt. No. 32Z3403 Issue 15
FITTING MEALSTREAM DOOR
AND
'T'
Mark
Stage 1
1
3
Page 33
Stage 2
4
2