Garland Mealstream Service Manual page 32

PROCEDURE
FOR
5. Fit door frame assembly (including seals
and cage nuts) firmly against cavity and
tighten all fixing bolts to secure (RHS)
and (LHS) Hinge assy.
6. Position door frame central by using the
following method.
Measure the distance between the side of the
door and the TDK Mounting Strip on both
sides with the door in the closed position.
Add these two measurements together and
divide by 2. Adjust hinge adjustment bolt so
the door is the distance calculated from the
TDK Mounting Strip and lock in position with
lock nut.
7. Fit (RHS) and (LHS) door arms through slots
in cavity and insert door arm pivot pins
through door arms into door frame.
8. Fit door springs to door arms and to the hook
at base of inner side panels. Check operation
of door and remove (LHS) spring.
BUILDING
AND
Door arm pivot pin
Mealstream Ovens Pt. No. 32Z3403 Issue 15
Page 32
FITTING MEALSTREAM DOOR
Hinge
TDK
Mount
Door
Door hinge adjustment
Spring clips