Connecting The Brother Machine To The Wireless Network - Brother MFC-9970CDW Quick Setup Manual

For Wireless Network Users

Connecting the Brother machine to the wireless network

Configure the wireless
18
settings using the
automatic wireless mode
a
Confirm your WLAN access point/router has
the Wi-Fi Protected Setup or AOSS™ symbol
as shown below.
b
Place the Brother machine within range of your
Wi-Fi Protected Setup or AOSS™ access
point/router. The range may differ depending
on your environment. Refer to the instructions
provided with your access point/router.
c
On your machine, press MENU.
Press a or b to display Network, and press
Network.
Press WLAN, and then WPS/AOSS.
When WLAN Enable? is displayed, press On.
This will start the wireless setup wizard.
Otherwise press Stop/Exit to exit from the
wireless setup wizard.
When Start WPS or AOSS on your
wireless access point / router ,
then press OK. appears, press the Wi-Fi
Protected Setup or AOSS™ button on your
WLAN access point/router. See the user's
guide for your WLAN access point/router for
instructions. And then press OK.
This feature will automatically detect which
mode (Wi-Fi Protected Setup or AOSS™) your
access point/router uses to configure your
machine.
Note
If your WLAN access point/router supports Wi-Fi
Protected Setup (PIN Method) and you want to
configure your machine using the PIN (Personal
Identification Number) Method, see Using the PIN
Method of Wi-Fi Protected Setup in the Network
User's Guide.
d
A connection result message appears on the
LCD and a WLAN report will automatically be
printed.
If the connection failed, check the error code on
the printed report and refer to
Troubleshooting on page 25.
Wireless setup is now complete. A four
level indicator at the top right of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install the MFL-Pro Suite, continue to
step 19.
®
For Windows Users:
Now go to
page 29
For Macintosh Users:
Now go to
page 31
23