Enter Personal Information (Station Id); Set Tone Or Pulse Dialling Mode - Brother MFC-9970CDW Quick Setup Manual

8
Enter personal
information (Station ID)
The machine displays the date and time, and if you
set up the Station ID, it will add it to each fax you send.
a
Press MENU.
b
Press a or b to display Initial Setup.
Press Initial Setup.
c
Press a or b to display Station ID.
Press Station ID.
d
Enter your fax number (up to 20 digits) using
the buttons on the Touchscreen, and then
press OK.
e
Enter your telephone number (up to 20 digits)
using the buttons on the Touchscreen, and
then press OK. If your telephone number and
fax number are the same, enter the same
number again.
f
Use the buttons on the Touchscreen to enter
your name (up to 20 characters), and then
press OK.
Note
• To enter numbers or special letters, press
repeatedly until the character you want to enter
appears, then press the character you want.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, and press
• To enter a space, press the space key button
or c.
For more details, see Entering text in the
Basic User's Guide.
g
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step a.
8
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature see Printing reports
in the Advanced User's Guide.
10
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a
b
c
d
e
.
9
Fax Transmission Report
Set tone or pulse dialling
mode
Press MENU.
Press a or b to display Initial Setup.
Press Initial Setup.
Press a or b to display Tone/Pulse.
Press Tone/Pulse.
Press Pulse (or Tone).
Press Stop/Exit.