Low Setting - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 7 Menu description tables
Variable
Item
range
R (PHASE) –63 For performing the hue correction for red.
:
+00
:
+63
S C U F R
R-Mg (PHASE) –63 For performing the hue correction between
:
red and magenta.
+00
:
+63
S C U F R
Mg (PHASE) –63 For performing the hue correction for
:
magenta.
+00
:
+63
S C U F R
Mg-B (PHASE) –63 For performing the hue correction between
:
magenta and blue.
+00
:
+63
S C U F R
B (PHASE) –63 For performing the hue correction for blue.
:
+00
:
+63
S C U F R
B-Cy (PHASE) –63 For performing the hue correction between
:
blue and cyan.
+00
:
+63
S C U F R
Cy (PHASE) –63 For performing the hue correction for cyan.
:
+00
:
+63
S C U F R
Cy-G (PHASE) –63 For performing the hue correction between
:
cyan and green.
+00
:
+63
S C U F R
G (PHASE) –63 For performing the hue correction for green.
:
+00
:
+63
S C U F R
G-Yl (PHASE) –63 For performing the hue correction between
:
green and yellow.
+00
:
+63
S C U F R
Yl (PHASE) –63 For performing the hue correction for yellow.
:
+00
:
+63
S C U F R
Yl-R (PHASE) –63 For performing the hue correction between
:
yellow and red.
+00
:
+63
S C U F R
∫ COLOR ON For switching ON/OFF of the 12-axis
CORRECT OFF independent color correction of the position
selected with the GAIN switch (L, M, H).
S C U F R
The underlining in the variable range column indicates the setting in the preset
mode.
(continued)

7-3-5 LOW SETTING

Remarks
∫ MASTER GAIN
S C U F R
H.DTL LEVEL
S C U F R
V.DTL LEVEL
S C U F R
DTL CORING
S C U F R
H.DTL FREQ.
S C U F R
LEVEL DEPEND.
S C U F R
MASTER GAMMA
S C U F R
BLACK GAMMA
S C U F R
∫ MATRIX TABLE
S C U F R
∫ COLOR
CORRECT
S
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to "7-6-2 CARD R/W SELECT."
Variable
Item
range
–3dB For setting the master gain to –3, 0, 3, 6, 9,
:
12, 15, 18, 21, 24, 27 or 30 dB.
0dB
:
30dB
00 For performing
:
correction level setting.
10
:
63
00 For performing the vertical detail correction
:
level setting.
20
:
31
00 For performing the noise elimination level
:
setting for detail.
01
:
15
00 For performing
:
frequency selection.
18
:
31
0 For setting the LEVEL DEPEND.
1 When the Y-detail is emphasized, details of
:
dark sections are compressed.
5
If the numerical value is larger, details of
bright sections are also compressed.
0.30 For setting the master gamma.
:
(0.01 step)
0.45
:
0.75
–3 For setting the gamma curve for the dark
:
portion.
OFF
–3 to –1:
:
+3 The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
OFF For selecting the color correction table for
A the linear matrix.
B
ON For switching ON/OFF of the 12-axis
OFF independent color correction.
U F R
Remarks
the horizontal detail
7
the horizontal detail
109