Fdl Command Summary - Xerox 4850 Reference

XEROX 4850/4890 HIGHLIGHT COLOR LPS FORMS CREATION REFERENCE
A.

FDL command summary

This appendix contains an alphabetized summary of the forms
description language (FDL) commands described in this manual.
The conventions and definitions used in describing FDL
commands are shown in Table A-1.
Table A-1. FDL command summary conventions
KEYWORD Required words in the command appear in
uppercase and may be abbreviated to the first
three characters (except for FMTn).
id Identifier consists of 1 to 6 alphanumeric
characters (0 through 9, A through Z, "–").
Stacked Parameters arranged one above another to
words denote a choice.
...
Multiple occurrence of the preceding bracketed
parameter is permitted.
lowercase Word, character, or phrase in lowercase is to be
replaced by a value.
[ ] Optional. If omitted, system substitutes its
default.
{ } Required choice of one of the parameters the
braces enclose.
unit DOTS, IN, INCH, INCHES, CM, or
CENTIMETERS. If omitted, defaults to grid size.
A-1