Xerox 4850 Reference page 64

FDL-GENERATED MESSAGES
B-2
FD2915 SECURITY VIOLATION.
Requested file has been protected by ABNORMAL
SECURITY = YES command. Attempt was made to
access it at wrong logon level. To access file,
obtain correct password and log on at Level 5.
FD4500 ERROR IN READING MAGNETIC TAPE.
System is unable to read input tape containing
FDL. Compiler will abort.
1. Clean tape drive.
2. If problem recurs, remake FDL tape.
FD8500 STACK UNDERFLOW.
Forms compiler software error has occurred.
Compiler will abort.
1. Retry compiling.
2. If message reappears, call your system support
representative.
FD9400 ERROR IN CLOSING THE SOURCE-INPUT FILE
FD9410 ERROR IN CLOSING THE SOURCE-OUTPUT FILE
FD9420 ERROR IN CLOSING THE LISTING/SUMMARY FILE
FD9430 ERROR IN OPENING THE SOURCE/OUTPUT FILE
FD9440 ERROR IN OPENING THE LISTING/SUMMARY FILE
FD9450 ERROR IN READING THE SOURCE-INPUT FILE
FD9460 ERROR IN READING THE SOURCE-OUTPUT FILE
FD9470 ERROR IN WRITING THE SOURCE-OUTPUT FILE
FD9475 ERROR IN BACK-SPACING THE SOURCE-OUTPUT FILE
FD9480 ERROR IN WRITING THE LISTING/SUMMARY FILE
FD9485 ERROR IN READING THE LISTING/SUMMARY FILE
FD9490 ERROR IN BACK-SPACING THE LISTING/SUMMARY FILE
FD9510 ERROR IN CLOSING CONTEXT FILE
FD9520 ERROR IN OPENING CONTEXT FILE
FD9530 ERROR IN READING CONTEXT FILE
FD9540 ERROR IN WRITING CONTEXT FILE
Disk/file error messages
System is unable to access (read, write, open, or close) indicated
file due to problem with disk. Forms compiler will abort.
1. Retry entry. Message should not reappear if failure was
intermittent memory error.
2. If problem persists, call your system support representative.
XEROX 4850/4890 HIGHLIGHT COLOR LPS FORMS CREATION REFERENCE