Table of Contents
Advertisement
3. Example 1 of pattern input (Disk format)
When using a new disk, be sure to initialize it to make il adaptable to a device.
1) Pressing the [Input selection] key, turn ON the power switch. The
mode enters to the input mode.
(Caution) Keep the [Input selection] key held pressed until the
indication appears after the origin retrieval has been
performed.
3) Press the numeral keys [9] and [0], then press the [Enter] key.
Format function No. = 090
4) Press the [Execution/Finish] key
5) Press the numeral key [l] in case of 2HD disk, and the numeral
key [2] in case of 2DD disk. Then, press the [Execution/Finish]
key.
6) After inserting the floppy disk, press the [Execution/Finish] key.
The machine starts to format. It takes about four minutes.
After the formatting has been completed. the indication will return to
the item 1).
2 : 720K (2DD))
Kind of FD
Formatting
No 090
Advertisement
Table of Contents
