Figure 2.15Combine The Metal Mounting Kit; Figure 2.16Din-Rail Step 1 - Advantech EKI-1521 User Manual

2.3.1.1 Panel/Wall Mounting
The EKI-1521/1522/1524 can be attached to a wall using the included metal brack-
ets. Each bracket comes with four screws; and then you can install the device firmly
via the components, please see the figure as below.
2.3.1.2 DIN Rail Mounting
You can mount the EKI-1521/1522/1524 on a standard DIN-rail. The DIN-rail kit is
screwed on the serial device server when out of factory. If the DIN-rail kit is not
screwed on the serial device server, please screw the DIN-rail kit on the serial device
server first.
First, hang the EKI-1521/1522/1524 to the DIN-rail with angle of inclination. See
below figure.
EKI-1521/1522/1524 User Manual
Figure 2.15 Combine the Metal Mounting Kit
Figure 2.16 DIN-rail Step 1
16