Restore To Factory Default Settings - Advantech EKI-1521 User Manual

3.9.5

Restore to Factory Default Settings

The configuration utility provides this function to let you can restore the serial device
server to factory default settings. The confirm message will be pop-up while clicking
"Restore to Factory Default Settings". If you really want to restore the serial device
sever to factory default settings, please click "Yes" button to continue.
Then, please power off the serial device server within ten seconds, after reconnect-
ing the power back, the all setting will be reset to the factory default. If the power
remains more than ten seconds, the serial device server will not have any changes.
45 EKI-1521/1522/1524 User Manual