Advantech AIMB-203 User Manual page 78

 DMI Extended Synch Control
This item allows users to enable or disable DMI Extended Synch.
 DMI Gen 2
This item allows users to select DMI speed.
 DMI De-emphasis Control
Configure the De-emphasis control on DMI.
 DMI IOT
This item allows users to enable or disable DMI IOT.
3.2.3.6 NB PCIe Configuration
 PEG0 - Gen x
"Auto, Enable or Disable" PEG0 - Gen x
 Run-time C7 Allowed
Enable or Disable the entry to C7 state. Don't enable this feature until you have
all the appropriate Save/Restore Controller/Endpoint states.
Enable PEG

"Auto, Enable or Disable" Enable PEG.
 Detect Non-Compliance Device
Detect Non-Compliance PCI Express Device in PEG.
Program PCIe ASPM after OpROM

Enabled: PCIe ASPM will be programmed after OpROM
Disabled: PCIe ASPM will be programmed before OpROM
 PEG0 De-emphasis Control
Configure the De-emphasis control on PEG0.
PEG0 ASPM

Control ASPM support for the PEG Device. This has no effect if PEG is not the
currently active device.
AIMB-203 User Manual 66