Advertisement
Hyundai Sonata (Double DIN)1995-1998
1
Disconnect the negative battery terminal to pre-
vent an accidental short circuit. Unclip the gear
shifter trim panel and remove (1) screw
exposed. Unclip the dash trim bezel and remove.
Remove (4) Phillips screws securing the factory
head unit and disconnect the wiring. Cut and
remove tabs "A" located in the top corners of
the dash cavity. (Figure A)
Locate the Radio Housing. Skip to the Installation
2
Instructions for VEHICLES on Page #3. (Figure B)
1
Disconnect the negative battery terminal to pre-
vent an accidental short circuit. Detach the
cable located under the left side of the glove
box. Unclip the trim piece in front of the gear
shifter and remove (2) Phillips screws exposed.
Unclip the gear shifter trim and remove (2)
Phillips screws exposed. Unclip the radio trim
bezel and remove. Remove (6) Phillips screws
securing the factory head unit and disconnect
the wiring. (Figure A)
2
Attach Spacer 3L and 4L to the left mounting
tabs of the Radio Housing and Spacer 3R and 4R
to the right mounting tabs of the Radio Housing
as shown. Skip to the Installation Instructions for
ALL VEHICLES on Page #3. (Figure B)
99-7309 DASH DISASSEMBL Y
Hyundai Sonata 1999-2001
A
B
A
B
2
"A"
"3L"
"4L"
"3R"
"4R"
Advertisement
