Trouble-Shooting Without Error Codes - Electrolux Hob Service Manual

8.1.2 TROUBLE-SHOOTING WITHOUT ERROR CODES

The error codes with total block of the system are the following:
9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24.
Condition
Error code 9
Cool down the
(the hob for at least
temperature on
one hour.
the power
board
exceeded
105°C)
The error codes 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24 are internal controls for the verification of the
electronic part. When these codes appear, the only solution is the replacement of the power board.
SOI 04.05 FV
Control
The error code 9
does not appear
anymore.
The error code 9
appears again.
Result
Excessive heating
of the hob due to
an incorrect use of
the hob.
Power board
faulty.
40/57
Cause Result
Reset the hob
as explained in
the charter
"Automatic
burner switch-
off".
Replace the
power board.
599 36 62-62