Local 802.1X User Add - ZyXEL Communications ZyAIR B-5000 User Manual

LABEL
Accessible Select either Local or Remote Radius, see the section 13.2.1 for more information.
802.1x Users on
Radius Parameters
Radius Server IP Enter the IP address of the external authentication server in dotted decimal notation.
Share Key Enter a password (up to 64 ASCII characters) as the key to be shared between the
external authentication server and the ZyAIR.
The key must be the same on the external authentication server and your ZyAIR. The
key is not sent over the network.
Radius Enter the port number of the external authentication server. The default port number is
authentication 1812.
port You need not change this value unless your network administrator instructs you to do
so with additional information.
Radius Enter the port number of the external accounting server. The default port number is
accounting Port 1813.
You need not change this value unless your network administrator instructs you to do
so with additional information.
Local User Database
No The local user is given a number in the database. Maximum amount of allowable users
is 20.
Username Enter the username (up to 24 ASCII characters) for this user profile.
Add Input new parameters and click Add to add access control parameters.
Delete Click Delete to remove access control parameters.
Modify Click Modify to change access control parameters.
FINISH Click FINISH to save your changes back to the ZyAIR.
CANCEL Click CANCEL to begin configuring the 802.1x screen afresh.

13.4.1 Local 802.1X User Add

Click Add in the previous screen to go to the next screen. The maximum allowable number of local users is
20.
IEEE 802.1x, RADIUS
Table 13-1 Basic Configuration 802.1x
ZyAIR B-5000 User's Guide
DESCRIPTION
13-5