ZyXEL Communications ZyAIR B-5000 User Manual page 136

ZyAIR B-5000 User's Guide
LABEL
Network This parameter specifies the IP network address of the final destination. Type a new
Address address into the static route that you would like to modify.
Subnet Mask This parameter specifies the subnet mask of the final destination. Type a new subnet
mask into the field that you would like to modify.
Gateway This field displays the IP address of the gateway. The gateway is an immediate
neighbor of your ZyAIR that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your ZyAIR. Type a new address
into the gateway that you would like to modify.
Click Ok to update the changes that you have made and return to the first static route
Ok
parameters screen.
Click Cancel to return to the first static route parameters screen without saving
Cancel
changes.
Click FINISH to save any changes back to your ZyAIR.
FINISH
CANCEL Click CANCEL to begin configuring the screen afresh.
17-4
Table 17-2 Static Route Parameters Modify
DESCRIPTION
Static Route