27.6 Example 1K Xmodem Image File Upload Using
HyperTerminal
The image file must be uploaded after you upload the software file.
Step 1.
Type DLP and press [ENTER].
Step 2.
When "CCC..." appears, select Transfer and Send File in the Hyperterminal window.
Step 3.
Set Protocol as 1K Xmodem.
Step 4.
Type the correct filename PFS.IMG and path.
Step 5.
Click Send to start configuration image restore.
When this is successful close the HyperTerminal window to exit.
Firmware and Configuration File Maintenance
Figure 27-8 Example Firmware Upload
ZyAIR B-5000 User's Guide
Type the configuration file's
location, or click Browse to search
for it.
Choose the 1K Xmodem protocol.
Then click Send.
27-9