Table of Contents
Advertisement
LABEL
Default Key
The WEP keys are used to encrypt data. Both the ZyAIR and the wireless stations must
use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one time. The
default key is key 1.
KeyGen
If you choose to enable WEP, then WEP keys for 64-bit or 128-bit will be generated
when you click this button.
FINISH
Click FINISH to save the changes to your ZyAIR.
CANCEL
Click CANCEL to begin configuring the screen afresh.
The wireless stations and ZyAIR must use the same ESSID, channel ID and WEP
encryption key (if WEP is enabled) for wireless communication.
Wireless
Table 12-1 Basic Configuration Wireless LAN
DESCRIPTION
ZyAIR B-5000 User's Guide
12-7
Advertisement
Table of Contents
