Table of Contents
Advertisement
ZyAIR B-5000 User's Guide
FILE TYPE
Firmware
27.1.1 TFTP and Telnet over WAN Will Not Work When
TFTP, FTP and Telnet over WAN will not work when:
1. The IP address of the network device connected to the port does not match the client IP. If it does not
match, the ZyAIR will disconnect the Telnet session immediately.
2. You have an SMT console session running.
27.2 Backup Configuration
When you upload new software, your configuration is lost.
Perform a configuration backup before you upload the software and configuration
restore after you upload the software.
Backup is highly recommended once your ZyAIR is functioning properly. Any serial communications
program should work fine; however, you must use 1K Xmodem protocol to perform the download/upload
and you don't have to rename the files.
Please note that terms "download" and "upload" are relative to the computer. Download means to transfer
from the ZyAIR to the computer, while upload means from your computer to the ZyAIR.
Do not interrupt the file transfer process as this may PERMANENTLY DAMAGE
YOUR ZyAIR. When the Backup Configuration process is complete, the ZyAIR will
27-2
INTERNAL NAME
Soho.bin
Pfs.img
WARNING!
automatically restart.
EXTERNAL NAME
This is the generic name for the firmware
on the ZyAIR.
This is the name of the web image file.
Firmware and Configuration File Maintenance
Advertisement
Table of Contents
