ZyAIR B-5000 User's Guide
Chapter 18
Bridging Parameters
This chapter shows you how to configure Bridging Parameters for your ZyAIR.
19.1 Bridging Overview
Bridging provides forwarding services between two or more networks. Frames from one network are
forwarded across a bridge to another network, although filtering can be employed to selectively forward
frames. See the section on Interface Parameters in Basic Configuration of Part I in this User's Guide for
more information.
18.2 Configuring Bridging Parameters
Click ADVANCED CONFIG and BRIDGING to go to the general bridge parameters configuration screen.
This screen allows you to disable or enable the bridge function of your ZyAIR and allows you to enter your
IP address and subnet mask.
Figure 18-1 Advanced Configuration Bridging Parameters
The following table describes the labels in this screen.
18-1
Bridging Parameters