Table of Contents
Advertisement
Getting started
Headset base installation - TL7610/TL7612
TL7610/TL7612 headset base installation
1.
Before installing the headset base, remove the rear bottom
piece of the headset base by pushing it away from the base.
2.
Unplug the curly handset cord from the telephone and plug
it into the
headset base.
Plug the small end of the
headset base power adapter
to the POWER jack (green dot)
on the headset base.
Plug the large end of the
headset base power adapter
into a power outlet not
controlled by a wall switch.
Telephone
wall jack
A DSL filter (not included)
is required if you have DSL
high-speed Internet service.
CURLY CORD jack (light blue dot) on the
Telephone
line cord
4
6
2
5
4
3
Advertisement
Table of Contents
