Table of Contents
Advertisement
Getting started
Headset base installation - TL7810/TL7812/
TL7910/TL7912
TL7810/TL7812/TL7910/TL7912 headset base installation (cont.)
Option 2: Connect the headset to a corded phone and computer
1.
Plug one end of the corded phone connection cable into the
CORDED PHONE CONNECTION jack (blue dot) at the back of
the headset base.
2.
Plug the other end of the corded phone connection cable into
the handset jack on the corded phone.
3.
Unplug the curly handset cord from the handset jack on the
corded phone and plug it into the jack on the corded phone
connection cable.
4.
Plug the small end of the headset base power adapter
to the POWER jack (green dot) on the headset base.
5.
Plug the large end of the headset base power adapter into a
power outlet not controlled by a wall switch.
Telephone
wall jack
A DSL filter (not included) is
required if you have DSL
high-speed Internet service.
The DSL filter must be plugged
into a telephone wall jack.
7
6
8
1
4
5
9
Telephone
line cord
Corded phone
9
3
2
Advertisement
Table of Contents
