Resetting The Lamp Operating Time - Epson dreamio EH-R4000 User Manual

Resetting the lamp operating time

The lamp operating time must always be reset after the lamp has been replaced with a new one.
The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative
operating time reaches a certain point, it causes the replacement warning message to be displayed.
L
1
Press to turn on the power.
3
Select "Reset Lamp Hours"
from the "Reset" menu.
Never disassemble or modify the lamp.
• Install the lamp and the lamp cover securely. The projector will not turn on if the lamp
or the lamp cover is not installed correctly.
• This product includes a lamp component that contains mercury (Hg). Please consult
your local regulations regarding disposal or recycling. Do not dispose of it with
normal waste.
2
Press k to display the
configuration menu.
4
Select "Yes" and then press v.
Maintenance
71