Memory" Menu; Component; Load Memory; Save Memory - Epson dreamio EH-R4000 User Manual

Configuration Menu Functions

Component

Change this setting depending on the type of signal that is being output from the video equipment that is
connected to the [Component] input port.
If "Auto" is selected, appropriate signal is automatically set. If colors appear unnatural even though
"Auto" is selected, select appropriate signal name in the menu.
Language
This sets the display language for messages and menus.
Reset
All adjustment values in the "Settings" menu other than "High Altitude Mode", "Projection",
"Component", "Language" and "Standby Mode" (EH-R4000 only) are reset to their default values.

"Memory" menu

Load Memory

This retrieves settings previously saved using "Save Memory".
This cannot be selected when nothing is saved at "Save Memory".

Save Memory

You can store the settings adjusted using the "Signal" and "Image" menus.
Erase Memory
You can erase stored memories that you no longer use.

Rename Memory

This can be used to change the names of the memories from "Memory1" to "Memory10". You can
rename so that its settings are easy to recognize. Either of the following two methods can be used to
change a memory name.
• Select a new memory from the list and then rename it.
• Select "Customized" and then enter a desired name.

Load Lens Position

This retrieves settings previously saved using "Save Lens Position".
This cannot be selected when nothing is saved at "Save Lens Position".
Save Lens Position
You can store the settings of focus, zoom and lens shift.
Erase Lens Position
You can erase stored lens position settings that you no longer use.
Rename Lens Position
This can be used to change the names of the memories from "Memory1" to "Memory3".
44
p.26
p.26
p.26
p.26
p.28
p.28
p.28