Customizing The Remote Control Menu; Using The Remote Control To Operate Your Equipment - Epson Ensemble HD 1080 User Manual

Customizing the Remote Control Menu

For most components that can be connected to the Ensemble HD system, a full set of functions is already
programmed into the remote control. These functions work with all the components listed in the tables
starting on page 85. If you've connected a different type of component or want to customize the menu for your
device, follow the steps below.
Note
There are 10 devices listed in the remote control's MAIN menu. You cannot add new ones, but you can modify an existing
one to customize it for your new component.
1
First enter the code for you component, as described on page 37. If you successfully enter the correct code,
the remote control will automatically create the appropriate commands in the menu for the new device.
2
If desired, change the menu name for the new device on the remote control. For example, you might want
to change AUX to HDTV. To change the device name, see "Editing Device Names and Commands" on
page 75.
Note
If you change the device name on the remote control, it will not match the name shown on the projection screen
when you select your component for viewing.
3 If necessary, delete any functions currently displayed in the menu that you don't need. See "Editing Device
Names and Commands" on page 75.
4 If any functions are missing, copy them from component's original remote control. See "Learning
Commands from Another Remote Control" on page 72.

Using the Remote Control to Operate Your Equipment

When you're ready to use your new component, follow these steps to turn it on:
1 Make sure the Ensemble HD system is ready for use. If necessary, press the
control, then press the
AV controller turn on.
2 Select the component you want to operate on the remote control's LCD screen (for example,
).
SAT
Your component turns on and the AV controller switches to that component as its source.
button to turn on the system. The screen comes down, and the projector and
ON
MAIN
button
MAIN
DVD
CABLE
SAT
HD
RADIO
1 OF 2
ON
39
button on the remote
MAIN
button
CABLE
or