Viewing Images At A Preset Image Quality (Memory Function); Saving, Loading, Erasing And Renaming Memory - Epson dreamio EH-R4000 User Manual

Viewing Images at a Preset Image Quality (Memory Function)

After using a subset of "Signal" and "Image" in the configuration menu to adjust the projected images,
the adjusted values can then be saved (Save Memory).
In addition, the saved data can be retrieved easily, so that you can enjoy viewing images with the
adjusted settings at any time (Load Memory).
Saving, Loading, Erasing and Renaming

Saving, Loading, Erasing and Renaming memory

memory
Up to ten adjustments can be saved to memory.
The adjusted values of the following items can be
saved.
Image Menu
All items
Signal Menu
Progressive
Frame Interpolation
Super-resolution
All items in "Advanced"
Depending on the input signals, it may not be
possible to set some items.
26
p.30
Load saved memories.
Erase Memory
Save Memory
Renaming Memory
Adjust each of the settings to the values
to be saved.
m
Press , and select "Save
Memory".
The Save Memory screen is displayed.
Select the memory name to register the
adjustments to from Memory1 to 10, and
F
v
press or .
When preceding the memory name is
green, this indicates that adjustments are
already saved to memory.
Select an already saved memory name, and
F
v
press or . A confirmation message will
be displayed. If you select "Yes", the
previous memory content is erased, and the
current adjustment values are saved.
Load Memory
m
Press , and select "Load Memory".
The Load Memory screen will be displayed.
Select the target memory name.