Samsung WC-M15i Series Service Manual page 23

Disassembly and Reassembly
4-10 Drive Assembly and Fan
1. Before you remove the drive assembly or fan,
you should remove:
-Controller Board (see page 4-3)
-Main Cover (see page 4-7)
-MP Tray (see page 4-6)
2. Unplug four connectors.
3. Remove seven screws securing the drive
assembly from the gear bracket, and remove the
drive assembly and motor drive board. Unplug
one connector from the board.
4-10
4. If you want to replace the fan, take it out.
5. If you want to remove the motor from the drive
assembly, remove three gold screws securing
the motor assembly to the gear bracket.
6. Remove the motor assembly. Remove two
screws securing the motor to the motor bracket,
then take the motor out.
Samsung Electronics