Samsung WC-M15i Series Service Manual page 22

4-9 Exit Assembly
1. Before you remove the exit assembly, you
should remove:
-Controller Board (see page 4-3)
-MP Tray (see page xx)
-Main Cover (see page 4-6)
-Fuser Cover (see page 4-10)
2. Remove three screws, and remove the bracket.
3. Remove two screws, unlatch the exit tray and
take it out.
Samsung Electronics
4. If you want to remove the roller shaft, unlatch
both ends of the shaft and take it out.
5. If you want to remove the exit rollers, sqeeze the
bottom of roller and take it out.
Disassembly and Reassembly
4-9