Projecting An Image From Av Equipment; Connecting The Projector To An Av Equipment - Canon X600 User Manual

Projecting an Image from AV Equipment

Connecting the Projector to an AV Equipment

Connect the projector and AV equipment.
Connecting to Video Terminals
Supplied component cable
AV equipment
Video output
terminal
(RCA terminal)
Commercial
Component
cable
(RCA x 3)
Projector
INPUT Signal: [COMPONENT] is selected
automatically
Before connecting cables, turn off both the projector and AV equipment.
The above illustrations are just examples. For more detailed information, refer to the manual
for the connecting AV equipment.
About the Component Cable
The projector cannot be connected to an AV equipment only with the supplied component
cable (RCA/Mini D-sub 15-pin). Please purchase either of the following cables according to the
type of the terminal on the AV equipment:
RCA terminal: RCA x 3/RCA x 3 cable
D-terminal: D-terminal/ RCA x 3 cable
56
(D terminal)
Commercial
Component
cable
(D terminal/
RCA x 3)
Supplied com-
ponent cable
(RCA/Mini D-sub
15-pin)
Component
input terminal
(ANALOG IN-2)
INPUT Signal: Select [SCART] (P63)
SCART cable
(SCART terminal)
LV-CA31 cable
Input Terminal-2
(ANALOG IN-2)
AV equipment
Projector