Power Button; Tank Full Lamp - Mitsubishi Electric MJ-E16SX-A1 Instruction Manual

¡Mode button
For switching from one operating
mode to another
¡Child lock
To set the child lock, press the mode
button for three or more seconds.
¡Humidity Selection
This is used to set the target humidity.
10
des
MODE
¡ LOW
¡ MILDEW GUARD
¡ LOW TEMP
¡ AUTO
LCD Panel
¡Mode Indicator
Indicates the current
operating mode.
10
¡Humidity Indicator
This indicates the approximate
humidity.
indicates the current
humidity
indicates the
humidity setting in
AUTO mode
The current humidity is displayed
in a range from 30 to 80%.
¡Swing louvre
button
Sets swing louvre
direction or locks it into
position
16
11
~
The LCD panel provides an explanation of all operations.
11
~
¡Swing monitor
Indicates the direction
of the swing louvre.
10 11
~
¡Power lamp
Lights when unit is ON.
¡Power button
Use this to switch the
unit OFF and ON.
12
¡Timer ON/OFF
Sets timer
¡Timer display
Displays the time set
for the ON/OFF timer.
12
9
¡Tank full lamp
This lights up to warn that
the water tank is full.
14 15
~
¡Information display
Indicates room and unit condition
..... Flashes when the power is
OFF and the humidity rises
..... Lights when the defrosting
function is operating.
..... Lights when the power is
ON and the room
temperature drops below
15°C.
14 15
~
13
13
7