Zoom] - Konica Minolta Bizhub C360 User Manual

5
5.1.3

[Zoom]

Image size in the original can be enlarged or reduced.
0 The auto zoom setting and the auto paper setting cannot both be selected at the same time.
0 If the auto zoom setting is selected and an enlargement is to be copied on paper larger than the original,
load the original with the same orientation as the paper.
%
Press [Basic] ö [Zoom].
Settings
[Auto]
[Full Size]
[Manual]
[Minimal]
[-]/[+]
[Fixed Zoom]
[User Preset Zoom]
d
Reference
To set image rotation:
Press the Utility/Counter key ö [User Settings] ö [Copier Settings] ö [Enlargement Rotation].
5-8
The most appropriate zoom ratio is automatically selected based on the
size of the loaded original and the specified paper size.
A copy that is the same size as the original (100%) is produced.
• Enter the zoom ratio (25.0% - 400.0%) of the copy.
• Under [Set Individual Zoom], you can enter different zoom ratios for the
X and Y directions.
[Set Zoom] Enter the desired zoom and select the button to
register the value with.
[User Preset Zoom] indicates the registered
zoom.
Copies an original image slightly smaller than the original size or the spec-
ified size. The image in the original is centered on the paper without any
cutoff.
Select this setting when you want to copy the entire scope of the original
within the paper used.
Configure the zoom ratio (25.0% - 400.0%) of the copy without changing
the aspect ratio.
Select a preset zoom when copying from a fixed size original onto a fixed
size paper.
Select a registered copy zoom value. To change the registered zoom val-
ues, use [Set Zoom].
[Basic]
bizhub C360/C280/C220 (Version 3)
5.1