Konica Minolta Bizhub C360 User Manual page 159

7.1 [System Settings]
Settings
[Density Adjustment]
[Image Stabilization]
[Paper Separation Adjust-
ment]
[Color Registration Adjust]
[Gradation Adjustment]
[Scanner Area]
[ADF Adjustment]
[Line Detection]
bizhub C360/C280/C220 (Version 3)
Correct the toner amount to be used by color depending on the paper
type.
• To correct the toner amount to be used in the black print mode, press
[Black Image Density].
[Image Stabilization Only]
[Image Stabilization Setting]
Adjust the paper position where the two sides are separated for 2-sided
print.
Correct color shifts if they are detected in the print result.
For details, refer to page 7-16.
Adjust irregular gradation levels of print images.
For details, refer to page 7-17.
[Image Stabilization Only]
[Print]
[Copy]
Adjust the scan range of the scanner.
For details on displaying this item, contact your service representative.
Make adjustments for scanning images in the ADF.
For details on displaying this item, contact your service representative.
[Prior Detection Setting]
[Feed Cleaning Settings]
Press the Start key to stabilize imag-
es.
Pressing the [Image Stabilization Only]
button executes normal image stabili-
zation.
If a good result was not achieved after
the [Image Stabilization Only] button
was pressed, execute [Initialize + Im-
age Stabilization].
Specify the type and opportunity of
image stabilization.
If [Standard] is selected, normal stabi-
lization is performed during warm-up
processing when a change in the ab-
solute humidity has been detected
during warm-up processing.
If [Color Priority] is selected, color sta-
bilization is performed when the pow-
er has been turned on.
Selecting [Black & White Priority] exe-
cutes monochrome stabilization dur-
ing warm-up when absolute humidity
change is detected during the warm-
up, and then stabilizes color before
performing color print.
Stabilize the image by pressing the
Start key before performing gradation
adjustment.
Adjust the gradation when the color
gradation has been changed in a print
image. This function performs adjust-
ment, emphasizing the gradation ex-
pression of an image and the
reproducibility of texts or lines.
Adjust the gradation when the color
gradation has been changed in a print
image. This function performs adjust-
ment to save as many images as pos-
sible in memory.
Configure whether to issue an alert
when the Slit Scan Glass is dirty.
• Select an alert display format and
contamination detection level.
Configure whether to remove a dirt on
the Slit Scan Glass each time one
sheet of paper passes through the
ADF when scanning an original using
the ADF.
7
7-11