Konica Minolta Bizhub C360 User Manual page 160

7
Settings
[User Paper Settings]
[Erase Adjustment]
Factory default
[AE Level Adjustment]
[Leading Edge Adjustment]
[Centering]
[Leading Edge Adjustment
(Duplex Side 2)]
[Centering (Duplex 2nd
Side)]
[Media Adjustment]
[Center Staple Position]
[Half-Fold Position]
[Punch Horizontal Position
Adjustment]
[Punch Regist Loop Size
Adjustment]
[Paper Alignment Plate
Settings]
[Density Adjustment]
[Image Stabilization Only]
[Image Stabilization Set-
ting]
[Paper Separation Adjust-
ment]
[Color Registration Adjust]
[Prior Detection Setting]
[Feed Cleaning Settings]
[Non-Image Area Erase
Operation Settings]
7-12
Configure special paper settings for [User Paper 1] through [User Paper 5].
Settings to configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
[Non-Image Area Erase Opera-
tion Settings]
Standard (2)
0.0 mm
0.0 mm
0.0 mm
0.0 mm
[Auto]
0.0 mm
0.0 mm
0
0
0.0 mm
0
[Image Stabilization Only]
[Standard]
0.0 mm
0 dot
[Yes]
[Warning Display]: [TYPE2]
[Detection level]: [Std.]
[Clean]
[Erase Operation]: [Specify]
[Erase Method]: [Rectangular]
[Original Density]: [1]
[System Settings]
Configure Non-Image Area operation
settings.
[Auto]:
Automatically detects the background
density of the original, and selects ei-
ther [Bevel] or [Rectangular] accord-
ingly.
[Specify]:
Allows you to manually specify an
erase method and original density. As
an erase method, select [Bevel] or
[Rectangular]. Specify an original den-
sity from five levels.
bizhub C360/C280/C220 (Version 3)
7.1