Basic Copy Operations - Konica Minolta Bizhub C360 User Manual

3.2

Basic copy operations

3.2.2 Basic copy operations
The following procedure describes the basic copy operations.
1
Arrange originals in the order you want them to be scanned and
load them face up in the ADF.
% The original should be placed face down on the Original
Glass.
2
Using the Keypad, enter a value for the number of copies you desire.
% If you have entered incorrect number of copies, press the C (clear) key on the keypad, and then re-
enter the correct number.
3
Press the Start key.
The original is scanned and copied.
% To interrupt the copy operation being performed, press the Stop key.
% A [Ready to accept another job.] message that appears during the current printing job indicates that
the next original can be scanned.
% If an original with copy guard patterns embedded is scanned, the copy operation is stopped and
the job is discarded.
% If an original with a password embedded by the password copy function is scanned, the copy op-
eration starts after you enter the password.
% If multiple originals with different passwords are scanned at the same time, you will need to enter a
password for each original.
bizhub C360/C280/C220 (Version 3)
3
3-7